Ford Transit 2002 Owner's Manual page 971

WARNINGS:
Do not smoke or carry lighted tobacco or open flame of any type when working on or
near any fuel related components. Highly flammable mixtures are always present and
3. Remove the charge air cooler.
For additional information, refer to:
Cooler - 1.8L Duratorq-TDCi (Lynx) Diesel/1.8L
Duratorq-TDDi (Lynx) Diesel (75 PS/90 PS)
(303-12 Intake Air Distribution and Filtering,
Removal and Installation) /
Charge Air Cooler - 1.8L Duratorq-TDCi (Lynx)
Diesel (75 PS/90 PS/110 PS), Vehicles Built
From: 08/2006 (303-12 Intake Air Distribution
and Filtering, Removal and Installation).
CAUTION: The generator must be
4.
protected from contamination. Failure to
follow this instruction may cause premature
failure of the generator.
Protect the generator with lint-free material to
prevent contamination.
CAUTION: Protect the fuel metering
5.
valve and fuel temperature sensor electrical
connectors to prevent contamination with the
cleaning fluid.
Clean the fuel pump and surrounding areas.
For additional information, refer to:
Injection Component Cleaning - Vehicles With:
Common Rail Fuel Injection
Charging and Controls - 1.8L Duratorq-TDCi
(Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel,
General Procedures).
6. Disconnect the fuel metering valve and fuel
temperature sensor electrical connectors (high-
pressure fuel supply line shown removed for
clarity).
7. Using the Pneumatic vacuum
foreign material from the area around the fuel
metering valve.
8. Remove the fuel metering valve (fuel pump
shown removed for clarity).
Install a new blanking plug to the open
port of the fuel pump.
Installation
http://vnx.su
Charge Air
Fuel
(303-04B Fuel
gun, vacuum