Ford Transit 2002 Owner's Manual page 953

Item 18 : Fuel pump pulley retaining bolts
Item 17 : Fuel pump venturi to fuel injector fuel return line connector
Item 16 : Fuel pump to fuel filter fuel supply line pump union blanking cap
Item 14 : Fuel pump to fuel filter fuel return line pump union blanking cap
Item 13 : Fuel pump to fuel filter fuel return line connector
Item 9 : High-pressure fuel supply line clamp
Item 8 : Fuel injection supply manifold high-pressure fuel inlet blanking cap
Item 7 : Fuel pump high-pressure fuel outlet blanking cap
Item 6 : High-pressure fuel supply line assembly
1. Using loctite 518 apply a thin bead of sealer to
the outer edge of the fuel pump pulley retaining
bolt holes.
1. Discard the blanking plugs.
1. Discard the blanking plugs.
1. Do not remove the fuel pump to fuel filter fuel
return line pump union blanking cap at this
stage.
1. Do not install the fuel pump to fuel filter fuel
return line connector at this stage.
1. Make sure the clamp is installed on the new
High-pressure fuel supply line in the same
position as removed.
1. Do not remove the fuel injection supply manifold
high-pressure fuel inlet blanking cap at this
stage.
1. Do not remove the fuel pump high-pressure fuel
outlet blanking cap at this stage.
1. Lubricate the high pressure fuel supply line union
threads with clean lubricant.
http://vnx.su