Engine - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel -
Engine—1.8L Duratorq-TDDi (Lynx) Diesel
(75 PS)
Description and Operation
Alongside the Duratec-DOHC (Zetec) engine, the vehicle is also available with a latest
generation diesel engine. This assembly is called the Endura-DI engine.
This diesel engine, is available with 55 kW (75 PS), is based on the familiar swirl chamber
diesel, but has been brought to the latest state of the technology with charge air cooling
and direct injection.
This engine therefore complies with EEC emissions standard D3 and all other requirements
made on latest generation assemblies with regard to fuel consumption, quiet running,
flexibility and power output.
Engine codes
The engine codes for the Endura-DI engines installed are:
55 kW / 75 PS - BHPA
55 kW / 75 PS - BHPB (Turkey only)
Location of the engine code on the cylinder block of the Endura-DI engine:
Crankshaft
The five main bearing crankshaft has thrust half rings on the third main bearing that control
the crankshaft end float.
Crankshaft timing sprocket
The crankshaft timing sprocket drives the injection pump sprocket by means of a chain
drive. The crankshaft timing sprocket is held in position only by the clamping pressure of
the center bolt.
Timing belt drive
Transit/Tourneo Connect 2002.5 (06/2002-)
http://vnx.su
Print