7. Remove the oil cooler.
Discard the gasket.
8. Using the special tool, detach the positive
crankcase ventilation (PCV) hoses from the lower
PCV pipe.
9. Using the special tool, detach the PCV hoses
from the valve cover.
10. Disconnect the cylinder head temperature (CHT)
sensor electrical connector.
1. Detach the electrical connector from the
PCV housing.
2. Disconnect the electrical connector.
11. Remove the PCV housing.
12. Using the special tool, detach the PCV hose from
the brake booster vacuum pump.
http://vnx.su