Front Drive Halfshafts-Intermediate Shaft - Ford Transit 2002 Owner's Manual

Front Drive Halfshafts - Intermediate
Shaft
Removal and Installation
Special Tool(s)
Separator, Ball Joint
211-020 (13-006)
General Equipment
Grip Wrench (Hazet 1847-1)
Materials
Name
Grease – inner joint
Specification
XS4C-M1C230-A
Removal
1. Loosen the strut top mount retaining nuts by
four turns.
2. Remove the wheel.For additional information,
refer to Section
3.
end retaining nut from the ball joint in order
to protect the thread.
NOTE: Counterhold the ball joint with a 5
mm Allen key.
Loosen the left track rod end retaining nut.
4.
using a soft cloth to prevent damage.
Detach the track rod end from the spindle carrier
using the special tool (left-hand side shown).
1. Loosen the track rod end.
2. Remove and discard the track rod end
5. Loosen the lower suspension arm ball joint
retaining nut.
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
204-04 Wheels and
CAUTION: Do not unscrew the track rod
CAUTION: Protect the ball joint gaiter
retaining nut.
Print
Tires.