39. Remove the thermostat housing.
Discard the gasket.
40. Detach the power steering reservoir and secure
it to one side.
Allow the fluid to drain into a suitable
container.
41. Clean the area around the fuel injection supply
manifold, high pressure fuel supply lines and
surrounding areas.
For additional information, refer to:
Injection Component Cleaning - Vehicles With:
Common Rail Fuel Injection
Charging and Controls - 1.8L Duratorq-TDCi
(Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel,
General Procedures).
42. Disconnect the fuel pump fuel return line quick
release coupling.
For additional information, refer to:
Release Coupling
General Information, General Procedures).
43. Disconnect the fuel injector electrical connectors.
Detach the wiring harness clips from the
cylinder head.
http://vnx.su
Fuel
(303-04B Fuel
Quick
(310-00A Fuel System -