Ford Transit 2002 Owner's Manual page 296

12. Remove the power steering pump.
13. Remove the PSP switch.
Installation
CAUTION: Care must be taken to
1.
prevent dirt ingress.
Install a new O-ring seal onto the power steering
pump to steering gear line union.
2. To install, reverse the removal procedure.
3. Fill and bleed the power steering system.
For additional information, refer to:
Steering System Filling
- General Information, General Procedures) /
Power Steering System Bleeding
Steering System - General Information, General
Procedures).
http://vnx.su
Power
(211-00 Steering System
(211-00