4. Using the
pneumatic vacuum
around the fuel injection one-way valves.
5. Remove the fuel injection one-way valves.
Discard the fuel injection one-way valves.
6. Using a clean
small screwdriver
the sealing washers.
Discard the sealing washers.
7. Pull back the protection sleeve to expose the fuel
injection pump wiring.
8. Cut the wiring at the fuel metering valve.
9. Using the special tool, loosen the fuel metering
valve by 4 turns.
10. Twist and pull the fuel metering valve to loosen
the O-ring sealing washers.
http://vnx.su
gun, clean the area
, carefully remove