Ford Transit 2002 Owner's Manual page 959

14 -
15 -
16 -
8. To install, reverse the removal procedure.
Removal Details
Item 7 : High-pressure fuel supply line support bracket
Item 8 : High-pressure fuel supply line and clamp
CAUTION: Make sure that the high-pressure fuel supply line remains in contact with
the fuel pump and fuel injection supply manifold until all unions have been detached and
cleaned. Failure to follow this instruction may result in foreign matter ingress to the fuel
injection system.
Item 9 : High-pressure fuel supply line clamp
NOTE: Make a note of the position of the high-pressure fuel supply line clamp.
Item 10 : Fuel injector high-pressure fuel supply lines clamp
See Installation Detail
Fuel injector high-pressure fuel supply line
See Removal Detail
See Installation Detail
Fuel injector high-pressure fuel supply line
See Removal Detail
See Installation Detail
Fuel injection supply manifold
See Installation Detail
9. Tighten the fuel system components in the
following order:
1. Clean the fuel pump, fuel injection supply
manifold, high-pressure fuel supply line and
surrounding areas.
For additional information, refer to
Component Cleaning - Vehicles With: Common
Rail Fuel Injection
1. Detach the unions. Using the engine vacuum
cleaner, vacuum foreign material from the high-
pressure fuel supply line, the fuel pump and the
fuel injection supply manifold prior to removing
the high-pressure fuel supply line.
2. Remove the high-pressure fuel supply line and
clamp. Using the engine vacuum cleaner,
vacuum foreign material from the fuel pump and
the fuel injection supply manifold open threaded
ports.
3. Install new blanking caps to the open threaded
ports on the fuel pump and the fuel injection
supply manifold.
http://vnx.su
1. Tighten the fuel injector high-pressure fuel
supply line to fuel injector unions.
2. Tighten the fuel injector high-pressure fuel
supply line to fuel injection supply manifold
unions.
3. Tighten the high-pressure fuel supply line
to fuel pump union.
4. Tighten the high-pressure fuel supply line
to fuel injection supply manifold union.
5. Tighten the fuel injection supply manifold
retaining bolts.
in this section.
Fuel Injection