Ford Transit 2002 Owner's Manual page 950

-
22
23 -
24 -
25 -
26 -
27 -
6. To install, reverse the removal procedure.
Removal Details
Item 3 : High-pressure fuel supply line support bracket
Item 4 : High-pressure fuel supply line to fuel pump union
CAUTION: Make sure that the high-pressure fuel supply line remains in contact with
the fuel pump and the fuel injection supply manifold until all unions have been detached
and cleaned. Failure to follow this instruction may result in foreign matter ingress to the
fuel injection system.
Item 5 : High-pressure fuel supply line to fuel injection supply manifold union
CAUTION: Make sure that the high-pressure fuel supply line remains in contact with
the fuel pump and the fuel injection supply manifold until all unions have been detached
and cleaned. Failure to follow this instruction may result in foreign matter ingress to the
Fuel pump sprocket retaining bolts
Fuel pump retaining bolts
See Removal Detail
See Installation Detail
Fuel pump
See Installation Detail
Fuel pump gasket
See Removal Detail
See Installation Detail
Fuel pump shield retaining bolts
Fuel pump shield
7.
piece of plastic pipe is used with the special
tool.
Remove the blanking plug from the fuel pump
fuel return line connector, and using the special
tool, prime the fuel pump until clean fuel is seen
entering the vacuum pump reservoir.
8. Remove the special tool.
9. Connect the fuel pump to fuel filter fuel return
line.
1. Clean the fuel pump, fuel injection supply
manifold, high-pressure fuel supply line and
surrounding areas.
For additional information, refer to
Component Cleaning
http://vnx.su
CAUTION: Make sure that a new clean
Discard the blanking plug.
in this section.
Fuel Injection