22. Remove the crossmember. For additional
information, refer to Section
Subframe and Mounting
23. Remove the flexible exhaust pipe.
Discard the gaskets.
24. Detach the air conditioning (A/C) compressor
from the bracket and secure it to one side.
25. Disconnect the power steering pressure (PSP)
switch electrical connector.
26. Using the special tool, disconnect the coolant
hose from the water pump.
27. Remove the intermediate shaft center bearing
cap.
Discard the center bearing cap and
locknuts.
CAUTIONS:
28.
http://vnx.su
502-00 Uni-Body,
System.