Ford Transit 2002 Owner's Manual page 267

24. Remove the HCU.
Vehicles built 08/2006 onwards
25. Disconnect the anti-lock braking system (ABS)
module electrical connector.
1. Release the retainer.
2. Disconnect the electrical connector.
CAUTION: Cap the brake tubes to
26.
prevent fluid loss or dirt ingress.
NOTE: Make a note of the position of the
brake tubes, to aid installation.
Disconnect the brake tubes from the hydraulic
control unit (HCU).
27. CAUTION: Cap the brake tubes to
prevent fluid loss or dirt ingress.
NOTE: Left-hand drive vehicles only.
Remove the master cylinder to HCU brake tubes
(left-hand drive vehicles only).
28. Remove the HCU and ABS module assembly and
the support bracket.
29. Detach the HCU and ABS module assembly from
the support bracket.
http://vnx.su