Ford Transit 2002 Owner's Manual page 67

bearing washer.
NOTE: Do not fully tighten the lower arm
retaining bolts at this stage.
Install the lower arm.
3. Tighten the lower arm retaining bolts in the
sequence shown.
1. The front retaining bolt.
2. The rear clamp upper retaining bolt.
3. The rear clamp lower retaining bolt.
4. WARNING: Install a new lower arm ball
joint retaining nut. Failure to follow this
instruction may result in personal injury.
CAUTION: Protect the heat shield using
a soft cloth to prevent damage.
NOTE: Use a T50 Torx driver to prevent the
ball joint from rotating.
Attach the lower arm to the wheel knuckle.
5. Install the wheel and tire. For additional
information, refer to Section
Tires.
6. Check the toe setting and adjust as necessary.
For additional information, refer to Section
00 Suspension System - General
http://vnx.su
204-04 Wheels and
204-
Information.