01B Engine - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel, In-
vehicle Repair).
50.
NOTE: Install the clip at a 45 degree angle to
the horizontal.
Install the PCV housing.
51. Connect the electrical connectors.
1. Install the glow plug wire terminal block
cable electrical connector retaining bolt.
2. Install the glow plug relay to glow plug
wire terminal block cable.
3. Connect the oil pressure switch electrical
connector.
52. Install the air cleaner.
For additional information, refer to:
(303-12 Intake Air Distribution and Filtering,
Removal and Installation).
53. Install the air cleaner outlet pipe.
54. Fill and bleed the cooling system.
For additional information, refer to:
System Draining, Filling and Bleeding
Engine Cooling, General Procedures).
55. Fill and bleed the power steering system.
For additional information, refer to:
Steering System Filling
- General Information, General Procedures) /
Power Steering System Bleeding
Steering System - General Information, General
Procedures).
56. Install the battery tray and connect the battery.
For additional information, refer to:
(414-01 Battery, Mounting and Cables, Removal
and Installation).
57. Change the
engine oil
http://vnx.su
Air Cleaner
Cooling
(303-03
Power
(211-00 Steering System
(211-00
Battery Tray
and the oil filter.