Ford Transit 2002 Owner's Manual page 488

29. Connect the reversing lamp switch electrical
connector.
CAUTION: If brake fluid is spilt on the
30.
paintwork, the affected area must be
immediately washed down with cold water.
NOTE: Make sure the spring clip is correctly
seated.
Connect the clutch slave cylinder supply
hydraulic fluid line to the transaxle and install
the spring clip.
31. Connect the transaxle ventilation hose to the
transaxle.
32. Connect the power steering hose to the power
steering fluid reservoir.
33. Connect the vacuum hose to the throttle body.
http://vnx.su