28.
CAUTIONS:
Install new bolts.
Tighten the clutch pressure plate
retaining bolts finger tight and then by two
turns at a time in the sequence shown to the
specified torque.
Using the special tool, install the clutch disc and
pressure plate.
NOTE: Install a new crankshaft position
29.
(CKP) sensor.
NOTE: The CKP sensor must make contact
with the flywheel.
Install the CKP sensor.
30. Install the fuel pump bracket.
31. Install the coolant distribution pipe.
32. Using the special tool, attach the upper coolant
hose to the coolant distribution pipe.
Vehicles built 04/2008 onwards
33.
1. 26 Nm
2. 50 Nm
http://vnx.su