Ford Transit 2002 Owner's Manual page 77

knuckle.
Installation
All vehicles
1. Check the lower arm ball joint heat shield for
damage. Install a new heat shield if necessary.
For additional information, refer to
Ball Joint in this section.
2. Install the wheel knuckle.
3. CAUTION: Make sure the halfshaft is
completely installed into the wheel hub.
Using the special tool, attach the wheel hub to
the halfshaft.
WARNING: Install a new lower arm ball
4.
joint retaining nut. Failure to follow this
instruction may result in personal injury.
CAUTION: Protect the heat shield using
a soft cloth to prevent damage.
NOTE: Use a T50 Torx driver to prevent the
ball joint from rotating.
Attach the lower arm to the wheel knuckle.
5. WARNING: Install a new tie-rod end
retaining nut. Failure to follow this
instruction may result in personal injury.
NOTE: Use a 5 mm Allen key to prevent the
ball joint stud from rotating.
Attach the tie-rod end to the wheel knuckle.
http://vnx.su
Lower Arm