Ford Transit 2002 Owner's Manual page 827

Item Part Number
1 -
2 -
3 -
4 -
5 -
6 -
NOTE: New fuel injector fuel return line retaining clips must be installed, when the fuel
injector fuel return line has been removed from the fuel injectors.
The fuel injector(s) are offset by 20 degrees from vertical in the cylinder head upper section
and are attached by means of retaining clamps.
The fuel injector(s) are sealed from the combustion chamber by means of a copper sealing
washer located between the fuel injector and the cylinder head. A new sealing washer must
always be installed when carrying out installation work.
The fuel injectors are controlled directly by the PCM.
The fuel return line(s) are attached to the fuel injectors by using the fuel injector fuel return
line retaining clips and are connected in parallel.
Description
Fuel injector electrical connector
Fuel injector
High-pressure fuel supply port
Sealing washer
Fuel injector retaining clamp
Fuel injector fuel return line retaining clip
http://vnx.su