42. Turn the camshafts until the cams of cylinder no.
1 are at TDC and insert the special tool into the
camshafts.
43.
NOTE: Do not tighten the camshaft pulley
bolts for the moment.
Install the camshaft timing pulleys.
NOTE: Install a new coolant pump gasket.
44.
Install the coolant pump gasket.
1. Lay the gasket in place.
2. Secure the gasket by bending over the
tabs.
45. Install the water pump.
NOTE: Pay attention to the installation
46.
position of the crankshaft thrust washer.
Install the crankshaft timing pulley and the
thrust washer.
http://vnx.su