Attach the left-hand halfshaft to the transaxle.
16. Using the special tool, connect the coolant hose
to the water pump.
17. Connect the power steering pressure (PSP)
switch electrical connector.
18. Attach the air conditioning (A/C) compressor to
the bracket.
NOTE: Install new flexible exhaust pipe
19.
gaskets.
Install the flexible exhaust pipe.
20. Install the crossmember. For additional
information, refer to Section
Subframe and Mounting
21. Install the accessory drive belt. For additional
information, refer to Section
Drive.
22. Lower the vehicle.
23. Tighten the engine front mount retaining nuts.
http://vnx.su
502-00 Uni-Body,
System.
303-05 Accessory