Ford Transit 2002 Owner's Manual page 315

11. Disconnect the power steering lines from the
steering gear valve body.
1. Remove the retaining bolt.
2. Rotate the clamp plate.
Allow the fluid to drain into a suitable
container.
12. Using a suitable transmission jack
block, support the crossmember.
13. Remove the crossmember retaining bolts
(transmission jack shown removed for clarity).
14. Using the transmission jack
block, support the crossmember.
15. Lower the front crossmember to gain access to
the steering gear.
16. Remove and discard the crossmember ball
bearing washers.
17. Remove the steering gear pinion extension shaft.
1. Detach the floor seal from the steering
gear.
2. Remove and discard the retaining bolt.
http://vnx.su
and a wooden
and the wooden