7. Remove the audio control switch (if equipped).
Disconnect the electrical connector.
8. Remove the steering column lower shroud.
1. Release the steering column locking lever.
2. Remove the retaining screws.
9. Disconnect the passive anti-theft system (PATS)
transceiver, windshield wiper/washer switch and
clockspring electrical connectors.
10. Disconnect the ignition switch and turn
signal/flash to pass electrical connectors.
11. Detach the wiring harness from the steering
column.
1. Release the locating pin.
2. Detach the wiring harness.
http://vnx.su