Ford Transit 2002 Owner's Manual page 439

Installation
CAUTION: The oil seal must be installed
1.
in Special Tool 303-291 as far as the stop.
Fit the new crankshaft rear seal in the Special
Tool.
To ensure correct installation, place the
special tool on a vice and press in the oil
seal using a hammer handle.
1 Incorrect installation
2 Correct installation
2. Draw in the oil seal.
Draw in the oil seal with the special tool
and two flywheel bolts.
3. NOTE: Clear the remainder of the locking
compound from the threaded holes on the
crankshaft.
NOTE: Use new bolts.
Attach the flywheel.
NOTE: Apply a layer of high-temperature
4.
grease. This should be so thin that no grease
is expelled from the splines when the clutch
http://vnx.su