Table of Contents
Advertisement
18.
CAUTION: Install the oil pan within ten
minutes of applying the sealant and tighten
the bolts within a further 5 minutes.
Apply a 3 mm diameter bead of
oil pan.
19. Install the oil sump.
Remove the
20. Tighten the oil pan bolts in two stages.
Stage 1: 6 Nm
Stage 2: 10 Nm
21.
NOTE: Check the seal of the oil drain plug for
damage. If necessary install a new oil drain
plug and seal.
Install the oil drain plug.
22. Immobilize the flywheel with the special tool.
23.
NOTE: Install new flywheel bolts.
NOTE: Remove any residual thread-locking
compound from the threaded bores.
Install the flywheel.
NOTE: Apply a layer of high-temperature
24.
grease. This should be so thin that no grease
is expelled from the splines when the clutch
http://vnx.su
sealant
to the
M6 x 20
studs.
Hide quick links:
Advertisement
Table of Contents
