Ford Transit 2002 Owner's Manual page 647

60. Detach the gear shift cables from the transaxle.
1. Detach the shift cable from the gear lever.
2. Pretension the abutment collars by turning
them in a counterclockwise direction and
remove the cable assembly from the
bracket.
3. Detach the selector cable from the selector
lever.
4. Pretension the abutment collars by turning
them in a counterclockwise direction and
remove the cable assembly from the
bracket.
5. Disconnect the adjustment mechanism by
pressing it in.
61. CAUTION: Excessive bending of the
exhaust flexible pipe may cause damage
resulting in failure.
Using a support wrap or a suitable splint,
support the exhaust flexible pipe
62. Detach the exhaust flexible pipe from the
exhaust system.
1. Discard the retaining nuts.
63. Remove the engine support insulator.
CAUTIONS:
64.
Support the halfshaft. The inner joint
must not be bent more than 18 degrees. The
outer joint must not be bent more than 45
degrees.
Do not damage the halfshaft oil seal.
NOTE: Plug the transaxle to prevent oil loss
or dirt ingress.
Detach the right-hand halfshaft and secure it to
one side.
Remove and discard the center bearing
http://vnx.su