Ford Transit 2002 Owner's Manual page 750

NOTE: Only turn the crankshaft in the normal
72.
direction of rotation.
Turn the crankshaft to TDC.
Turn the crankshaft slowly until the
crankshaft stops.
CAUTIONS:
73.
Make sure that the crankshaft does not
rotate during installation of the special tool.
Make sure the crankshaft is in TDC
position before locking the special tool.
Make sure that the special tool engages
correctly.
Using the special tool, lock the crankshaft in
position.
CAUTION: If the pointer is not visible in
74.
the timing belt tensioner window, the timing
belt tensioning steps must be repeated.
Check that the timing belt tensioner pointer is
positioned in the window.
CAUTION: If the special tool cannot be
75.
installed, the timing belt tensioning steps
must be repeated.
Install the special tool.
If the special tool cannot be installed,
repeat procedure in previous steps.
Vehicles with charge air cooler
76. Install the engine front mount bracket.
http://vnx.su