Ford Transit 2002 Owner's Manual page 725

NOTE: Do not tighten the fuel injection
85.
supply manifold retaining bolts at this stage.
Install the fuel injection supply manifold.
NOTE: Install new high-pressure fuel supply
86.
lines.
Lubricate the high-pressure fuel supply line
union threads with clean ISO 4113 lubricant
from the high-pressure fuel supply line parts kit.
CAUTIONS:
87.
Use an open-ended wrench to prevent
the component from turning.
Do not allow the unions to hit the olive
ends of the high-pressure fuel supply line as
this may damage the ends of the line and
allow foreign material to enter the fuel
injection system.
Remove the blanking plugs from the
high-pressure fuel supply line, the fuel
injector and the fuel injection supply
manifold at the last possible moment. Failure
to follow this instruction may result in
foreign matter ingress to the fuel injection
system.
NOTE: To aid identification of the high-
pressure fuel supply lines, the unions at the
fuel injector end are etched with the cylinder
number.
NOTE: Do not tighten the high-pressure fuel
supply line unions at this stage.
NOTE: Maintain pressure on the high-
pressure fuel supply line to keep the lines in
http://vnx.su