Vehicles built up to 08/2006
19. Disconnect the anti-lock braking system (ABS)
module electrical connector.
1. Release the retainer.
2. Disconnect the electrical connector.
CAUTION: Cap the brake tubes to
20.
prevent fluid loss or dirt ingress.
NOTE: Make a note of the position of the
brake tubes, to aid installation.
Disconnect the brake tubes from the hydraulic
control unit (HCU).
CAUTION: Cap the brake tubes to
21.
prevent fluid loss or dirt ingress.
NOTE: Left-hand drive vehicles only.
Remove the master cylinder to HCU brake tubes.
22. Detach the HCU and ABS module assembly from
the support bracket.
23. Remove the HCU to ABS module retaining bolts.
http://vnx.su