Ford Transit 2002 Owner's Manual page 111

Wheels and Tires - Wheel and Tire
Removal and Installation
CAUTIONS:
Do not use heat to loosen a seized wheel nut. Heat may damage the wheel and
wheel hub.
Do not use power tools on locking wheel nuts.
Transit/Tourneo Connect 2002.5 (06/2002-)
Removal
1. Loosen the wheel nuts.
2. Raise and support the vehicle.
For additional information, refer to:
02 Jacking and Lifting, Description and
Operation).
3. Remove the wheel and tire.
Installation
WARNING: Remove any corrosion or dirt
1.
from the mounting surfaces of the wheel,
wheel hub, brake drum or brake disc.
Corrosion or dirt on the mounting surfaces
may cause the wheel nuts to loosen and the
wheel to come off while the vehicle is in
motion. Failure to follow this instruction may
result in personal injury.
Clean the wheel hub and mating surfaces.
2. Install the wheel and tire.
3. Lower the vehicle.
4. Tighten the wheel nuts in the sequence shown.
For additional information, refer to:
Specifications (204-04 Wheels and Tires,
Specifications).
http://vnx.su
Print
Lifting (100-