Ford Transit 2002 Owner's Manual page 698

6. Insert the camshaft lower half shells and coat
them with engine
7. Align the camshaft.
Insert the camshaft and turn it until the
groove on the eccentric cam is parallel to
the upper edge of the cylinder head (the
larger semi-circle faces upwards).
8. Insert the camshaft upper half shells and coat
them with engine
9. Apply sealant to the bearing caps at the
positions shown.
10. NOTE: The arrows on the camshaft bearing
caps must point to the front of the engine.
NOTE: Tighten the camshaft bearing caps
evenly a turn at a time.
Install the camshaft.
1. Install the brake vacuum pump plunger.
2. Position camshaft bearing caps "1", "3"
and "5" and tighten the nuts fingertight.
3. Position the other camshaft bearing caps
and tighten the nuts fingertight.
NOTE: Tighten the camshaft bearing caps
11.
evenly a turn at a time.
Tighten the camshaft bearing cap retaining nuts.
http://vnx.su
oil.
oil.