Ford Transit 2002 Owner's Manual page 224

not placed on the remaining engine mount
when moving the engine forwards.
Move the engine front mount towards the front
of the vehicles to its maximum deflection.
26. Remove the brake booster.
Rotate the booster through 180 degrees to
aid removal.
Discard the gasket.
Installation
CAUTIONS:
1.
Make sure that the brake booster
actuating rod is correctly positioned through
the bulkhead rubber boot.
Make sure the brake booster gasket is
correctly positioned on the brake booster
before installation.
NOTE: Install a new brake booster gasket.
NOTE: Install new O-rings on the refrigerant
lines.
NOTE: Coat the O-rings for the refrigerant
lines with clean refrigerant oil prior to
installation.
To install, reverse the removal procedure.
http://vnx.su