Ford Transit 2002 Owner's Manual page 830

The high pressure system consists of the following components:
Distributor pump VP 30
Injector
High pressure fuel lines
Fuel filter
Item Part Number
1 -
2 -
3 -
4 -
5 -
A fuel filter specially matched to the requirements of the fuel injection system is installed in
order to guarantee problem free operation of the fuel injection system.
A control valve used to pre-warm the fuel is mounted on the top of the fuel filter. It is held
in the filter housing with a securing clip.
The control valve is made of bi-metal. It closes the return to the fuel tank at low
temperatures. This causes the warmed fuel to flow from the injection pump back into the
fuel filter, thus warming it, after which the fuel flows on to the distributor pump.
The fuel lines have a push-fit connection, and can be separated after the retainers have
been disengaged.
The feed and return fuel lines are colour coded: feed white, return black.
The correct installation orientation (arrow) must be observed when installing the fuel filter.
The fuel filter is provided with a water collection chamber in order to prevent the fuel
injection system being damaged by condensed water.
Description
Retaining clip
Control valve
Return
Feed
Fuel filter
http://vnx.su