Ford Transit 2002 Owner's Manual page 976

WARNING: Do not smoke or carry lighted tobacco or open flame of any type when
working on or near any fuel related components. Highly flammable mixtures are always
present and may ignite. Failure to follow these instructions may result in personal injury.
CAUTION: Diesel fuel injection equipment is manufactured to very precise tolerances
and fine clearances. It is therefore essential that absolute cleanliness is observed when
working with these components. Always install blanking plugs to any open orifices or
lines.
11. Remove the fuel metering valve.
Discard the fuel metering valve.
Installation
1. To aid installation, lightly lubricate the two fuel
metering valve O-ring seals with Renap 220 oil
(supplied in the parts kit).
2. Install the sealing washer to the fuel metering
valve (unless already pre-assembled).
3. Finger tighten the fuel metering valve in a 10
o'clock position.
http://vnx.su