Tighten the retaining bolts in two stages.
Stage 1: 90 Nm
Stage 2: 90 degrees
Vehicles with common rail fuel injection
9.
NOTE: Install a new crankshaft pulley
retaining bolt.
Using the special tool, install the crankshaft
pulley.
Tighten the retaining bolts in two stages.
Stage 1: 100 Nm
Stage 2: 180 Nm
All vehicles
10. Install the timing belt. For additional information,
refer to: (303-01B Engine - 1.8L Duratorq-TDCi
(Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel)
Timing Belt - 75 PS/90 PS
Repair),
Timing Belt - 1.8L Duratorq-TDCi (Lynx)
Diesel (75 PS/90 PS/110 PS), Vehicles Built
From: 08/2006
http://vnx.su
(In-vehicle
(In-vehicle Repair).