Ford Transit 2002 Owner's Manual page 943

Removal Details
Item 4 : Special tool (303 193) 21-104
Item 13 : High-pressure fuel injection pipes
NOTE: Discard the high-pressure fuel injection pipes.
Item 16 : High-pressure fuel injection pipes
NOTE: Discard the high-pressure fuel injection pipes.
Item 17 : Fuel injection pump supply line
Item 18 : Fuel injection pump return line
Item 22 : Fuel injection pump pulley retaining bolts
Item 23 : Fuel injection pump pulley
Item 25 : Fuel injection pump seal
NOTE: Discard the fuel injection pump seal.
8. Remove the special tool.
9. Turn the ignition switch to position three (engine
cranking). Crank the engine until clean fuel
escapes from the high-pressure fuel injection
pipe unions.
10. Tighten the high-pressure fuel injection pipe
unions.
1. Raise the vehicle.
1. For additional information, refer to Section
00A Fuel System - General Information
00B Fuel System - General
1. For additional information, refer to Section
00A Fuel System - General Information
00B Fuel System - General
1. The fuel injection pump retaining bolts are sealed
to the fuel injection pump sprocket and will
require thorough cleaning before installation.
1. The fuel injection pump pulley is sealed to the
fuel injection pump sprocket and will require
thorough cleaning before installation.
http://vnx.su
310-
/ 310-
Information.
310-
/ 310-
Information.