Item 8 : Coolant pump
NOTE: The engine will need to be raised using the special tool to allow removal of the
water pump.
Installation Details
Item 8 : Coolant pump
NOTE: Install the water pump onto the dowels before installing the coolant pump
retaining bolt.
Item 6 : Coolant pump upper retaining bolt
CAUTION: Make sure the fabricated piece of laminated card is correctly positioned
between the timing belt and coolant pump before installing the coolant pump upper
retaining bolt.
Item 4 : Coolant pump pulley retaining bolts
coolant pump upper retaining bolt.
1. Using the special tool, raise the front of the
engine by 60 mm.
1. Install the coolant pump pulley retaining bolts
hand tight.
2. Using the special tool, lower the front of the
engine to its original position.
http://vnx.su