Ford Transit 2002 Owner's Manual page 563

the fuel injection system.
NOTE: Do not tighten the high pressure fuel
supply line unions at this stage.
NOTE: Maintain pressure on the high
pressure fuel supply line to keep the olive in
contact with the injector cone while hand
tightening the union.
NOTE: The yellow colored collar is positioned
at the injector end and the blue colored
collar is positioned at the fuel injection
supply manifold end of the high pressure fuel
supply line.
Attach the high pressure fuel supply lines of
cylinder one and four to the fuel injectors.
CAUTION: Do not allow the unions to hit
10.
the olive ends of the high pressure fuel
supply line as this may damage the ends of
the line and allow foreign material to enter
the fuel injection system.
NOTE: Do not tighten the high pressure fuel
supply line unions at this stage.
NOTE: Maintain pressure on the high
pressure fuel supply line to keep the olive in
contact with the injector cone while hand
tightening the union.
Install the high pressure fuel supply lines of
cylinder one and four to the fuel supply manifold.
NOTE: Make sure the clamp is installed in
11.
the same position as removed.
Install the high pressure fuel supply line clamp
to the high pressure fuel supply line.
12. NOTE: Use a new high pressure fuel supply
line union.
Lubricate the high pressure fuel supply line union
threads with clean ISO 4113 lubricant from the
high pressure fuel supply line parts kit.
CAUTION: Do not allow the unions to hit
13.
the olive ends of the high pressure fuel
supply line as this may damage the ends of
the line and allow foreign material to enter
the fuel injection system.
NOTE: Do not tighten the high pressure fuel
supply line union at this stage.
NOTE: Maintain pressure on the high
http://vnx.su