Calibration Of Essential Measuring Equipment - Ford Transit 2002 Owner's Manual

Dry cleaning.
Removal of loose dirt with soft or cable brushes.
Scraping dirt off with a piece of metal or wood.
Wiping off with a rag.
WARNING: Wear eye protection when cleaning vehicle components with compressed
air, a steam cleaner or a power washer. Failure to follow this instruction may result in
personal injury.
CAUTIONS:
Compressed air is sometimes 'wet' so use with caution, especially on hydraulic
systems.
To prevent damage to the electrical connectors in the engine compartment, do not
use a steam cleaner or a power washer to clean the engine compartment.
Blowing dirt off with compressed air.
Removal of dry dust using vacuum equipment. This method must always be used to
remove friction lining material dust (asbestos particles).
Steam cleaning.
WARNING: Most solvents require careful handling and some are harmful. Refer to
Health and Safety Precautions and to the manufacturers literature for the relevant safety
precautions. Failure to follow these instructions may result in personal injury.
Various solvents are available which are suitable for component cleaning. Some
components, such as brake hydraulic parts and electrical assemblies should be cleaned only
with recommended solvents — refer to Solvents, Sealers and Adhesives or to the section of
the manual relevant to the component.

Calibration of Essential Measuring Equipment

WARNING: Equipment, which requires regular calibration, must be calibrated in
accordance with the manufacturers instructions. Failure to follow this instruction may
result in personal injury or damage to components.
It is of fundamental importance that certain essential equipment, for example torque
wrenches, multimeters, exhaust gas analyzers or rolling roads, are regularly calibrated in
accordance with the manufacturers instructions.
http://vnx.su