Engine System-Flywheel Inspection-Vehicles With: Dual Mass Flywheel - Ford Transit 2002 Owner's Manual

Engine System - General Information -
Flywheel Inspection—Vehicles With: Dual
Mass Flywheel
General Procedures
CAUTIONS:
Do not rework the flywheel if it is distorted.
Do not clean the dual mass flywheel with any kind of fluid. Clean the flywheel with a
dry cloth only.
Do not clean the gap between the primary and secondary mass. Only clean the bolt
connection surface and the clutch surface.
Transit/Tourneo Connect 2002.5 (06/2002-)
1. Inspect the flywheel, if there is evidence of the
following install a new flywheel:
Cracks.
Worn ring gear teeth.
Chipped or cracked ring gear teeth.
2. Check the flywheel for lateral movement.
Rotation movement in either one or both
directions, or rock on it's axis in relation to
the primary mass is acceptable.
If there is any lateral movement, install a
new flywheel.
CAUTION: Make sure that the three
3.
locating dowels are installed.
Check if the locating dowels are touching the
primary mass of the flywheel.
If the locating dowels are touching the
primary mass of the flywheel, install a new
flywheel.
4. Inspect for grease along the welding.
If grease is evident, install a new flywheel.
http://vnx.su
Print