Ford Transit 2002 Owner's Manual page 473

NOTE: Make sure that a new component is
47.
installed.
NOTE: Do not tighten the bolt of the timing
belt tensioner for the moment.
Install the timing belt tensioner.
48. Install the timing belt idler pulley.
CAUTIONS:
49.
Do not kink the timing belt (bend
diameter must not be less than 35 mm).
Do not turn the crankshaft. If necessary
check whether the crankshaft is touching
Special Tool 303-574.
NOTE: The clip of the timing belt tensioner
must not be hooked into the pressed steel
cover.
NOTE: Install a new timing belt.
Install the timing belt.
Starting from the crankshaft timing pulley
and working anti-clockwise, put the timing
belt in place. Pull the belt tight as you
proceed.
NOTE: Make sure that a new component is
50.
installed.
Tension the timing belt.
1. Hook the timing belt tensioner into the
metal cover.
http://vnx.su