Ford Transit 2002 Owner's Manual page 930

Fuel Charging and Controls - 1.8L Duratorq-TDCi (Lynx)
Diesel/1.8L Duratorq-TDDi (Lynx) Diesel - Fuel Injectors—1.8L
Duratorq-TDCi (Lynx) Diesel (75 PS/90 PS/110 PS), Vehicles
Built From: 08/2006
Removal and Installation
General Equipment
Hose clamp remover/installer
Long nose pliers
Removal
Installation
1. Refer to: Diesel Fuel System Health and Safety Precautions
and Operation).
2. General Equipment: Hose clamp remover/installer
3.
4. Clean the fuel injectors, high-pressure fuel supply lines and surrounding areas.
Refer to: Fuel Injection Component Cleaning - Vehicles With: Common Rail Fuel Injection
Fuel Charging and Controls - 1.8L Duratorq-TDCi (Lynx) Diesel/1.8L Duratorq-TDDi (Lynx) Diesel,
General Procedures).
1. NOTE: Make sure that new components are installed.
Discard the blanking caps.
Torque: 37 Nm
2. General Equipment: Long nose pliers
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
(100-00 General Information, Description
5. CAUTIONS:
Make sure that the fuel line remains in contact at
both ends until both unions nuts have been
unscrewed and the area around the joints thoroughly
cleaned.
Vacuum any foreign material from the fuel pump
and fuel rail unions before sealing the unions with
blanking caps.
Make sure that the fuel line union does not
rotate.
Make sure that all openings are sealed. Use new
blanking caps.
Discard the the high-pressure fuel supply lines.
Discard the fuel injector clamps and bolts.
Discard the fuel injector sealing washers.
Print
(303-04B