Ford Transit 2002 Owner's Manual page 605

CAUTION: Use new, unoiled cylinder
5.
head bolts.
Tighten the cylinder head bolts in four stages.
Using the special tool, tighten the bolts in
the sequence shown.
Stage 1: 20 Nm.
Stage 2: 54 Nm.
Stage 3: 90 degrees
Stage 4, short bolts: 70 degrees.
Stage 4, long bolts: 90 degrees.
6. Using the special tool, attach the upper coolant
hose to the EGR cooler.
7. NOTE: Use new catalytic converter nuts.
Attach the exhaust manifold to the catalytic
converter.
8. Attach the power steering reservoir.
http://vnx.su