Steering Linkage-Steering Gear Boot - Ford Transit 2002 Owner's Manual

Steering Linkage - Steering Gear Boot
Removal and Installation
General Equipment
Pincers
Materials
Name
Grease
Specification
ESB-M1C119-B
Removal
1. Remove the tie-rod end.
For additional information, refer to
in this section.
2. Remove the tie-rod end locknut.
NOTE: Make sure the tie-rod is clean before
3.
removing the steering gear boot.
Remove the steering gear boot.
Installation
NOTE: Lubricate the steering gear boot.
1.
Install the steering gear boot.
2. Using a suitable pair of pincers, install a new
steering gear boot inner clamp.
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
Discard the clamps.
Print
Tie-Rod End