Clear Lldp Neighbors - Dell 8 Command Reference Manual

clear lldp neighbors

Clears the Link Layer Discovery Protocol (LLDP) neighbor information on all or specified interfaces.
Synopsis clear lldp neighbors interface [{in | ex}tengigabitethernet slot/port]
Operands interface
Defaults There are no default configurations for this command.
Command Privileged EXEC mode
Modes
Description Use this command to clear the LLDP neighbor information about the devices learned through an
interface.
Usage If the interface operand is not specified, this command clears the LLDP neighbor information
Guidelines received on all the interfaces.
Examples To clear the LLDP information for all interfaces:
See Also show lldp neighbors
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Use this keyword to specify the 10 Gbps Ethernet interface using the following
operand followed by the slot or port number.
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
switch#clear lldp neighbors
clear lldp neighbors
101
6