Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
Software Revision: 3.8
Serial number: 7978399
Manufacturer name: Manufacturer
Model name: Model 1
Asset ID: Asset 123
Switch# show lldp local gi1/0/2
LLDP is disabled.
show lldp neighbors
Use the show lldp neighbors Privileged EXEC mode command to display
information about neighboring devices discovered using Link Layer Discovery
Protocol (LLDP). The information can be displayed for all interfaces or for a
specific interface.
Syntax
[interface-id]
show lldp neighbors
Parameters
interface-id—Specifies an interface ID. The interface ID must be an
Ethernet port.
Command Mode
Privileged EXEC mode
User Guidelines
There are no guidelines for this command.
A TLV value that cannot be displayed as an ASCII string is displayed as an
hexadecimal string.
Example
The following examples display information about neighboring devices
discovered using LLDP .
Location information, if it exists, is also displayed.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
446
LLDP Commands
Advertisement
Table of Contents
