Toyota Celica 1993 AT200 series Repair Manual page 553

BR-38
BRAKE sysrEM - FRoNT BRAKE(5S-FE, 35-GE w/o super strut Type)
C A L l P E R R E M O V A L
1 . D I S C O N N E C T F L E X I B L E H O S E
(a) Remove the union bolt and 2 gaskets from the caliper,
then disconnect the flexible hose from the caliper.
(b) Use a containsr to catch th6 brake fluid as it drains
out,
2. REMOVE CALIPER
(a) Hold the sliding pin and loosen the 2 installation bolts.
(b) Remove the 2 installation bolts.
(c) Remove the caliper from the torque plate.
3. REMOVE 2 BRAKE PADS
Rsmove the inside and outside oads.