Toyota Celica 1993 AT200 series Repair Manual page 736

BE-3
BODY ELECTRICAL SYSTEM _ GENERAL INFORMATION
R e f e r e n c e :
R a i s e U p
T e r m i n a l R e t a i n e r
Exsmple;
{CasE 2)
S e c o n d a r y
L o c k i n g D e v i c e
H O W T O R E P L A C E T E R M I N A L
(with terminal retainer or secondary locking device)
1 .
P R E P A R E T H E S P E C I A L T O O L
HINT: To remove the terminal from the connector,
please construct a special tool or use an object similar
to that shown on the l6ft.
2 .
D I S C O N N E C T C O N N E C T O R
3 .
D I S E N G A G E T H E S E C O N D A R Y L O C K I N G D E V I C E
O R T E R M I N A L R E T A I N E R
(a) Locking device must be disengaged before the termi-
nal locking clip can be released and th€ terminal ro-
moved from the connector.
(b) Use a special tool or th€ terminal pick to unlock the
secondary locking device or tsrminal retainer.
NOTICE: Do not remove the terminal retainer from con-
n e c t o r b o d y .
@
For Non -Waterproof Type Connector
HINT: The needle insertion position varies according
ffi$
to the connector's shape (number of terminals etc.), ffi
so check the position before inserting it.
" C a s e 1 "
Raise the terminal retainer up to the temporary lock
oosition.
Retainer at Full Lock Position
T e r m i n a l R e t a i n e r
"Case 2"
Open the secondary locking device.