Toyota Celica 1993 AT200 series Repair Manual page 533

8 R . 1 8
BRAKE SYSTEM - MASTER CYLINDER
5. INSTALL RESERVOIR
(a) Install the cap and strainer to lhe reservoir.
(b) Push the reservoir onto the cylindar.
(c) lnstall th€ sst screw while pushing on the reservoir.
Torqus: 1.7 N.m (17.5 kgf .cm, 15.2 in..lbf)
6. INSTALL MASTER CYLINDER BOOT
Align the grooves on the master cylindar boot and
master cylind€r flange as shown, install the cylinder
boot on the master cvlinder.
M A S T E R C Y L I N D E R I N S T A L L A T I O N
1 . A D J U S T L E N G T H O F B R A K E B O O S T E R P U S H R O D
B E F O R E I N S T A L L I N G M A S T E R C Y L I N D E R
( S e e p 6 s e B R - 2 5 )
2. INSTALL MASTER CYLINDER
l n s t a l l t h e m a s t e r c y l i n d a r a n d a n e w g a s k e t o n t h e
brake booster with 2 nuts.
Torque: 13 N m (1 30 kgf.cm, I ft.lbt)