Toyota Celica 1993 AT200 series Repair Manual page 459

sA-104
suspENsroN AND AXLE - FRoNT suspENsroN(super
strut Type)
SA
2 . I N S T A L L F R O N T S U B - F R A M E
(a) Jack up the front sub-frame with lower arms.
(b) Position the f ront sub -f rame and tighten the 2 bolts.
Torque: 127 N.m (1,300 kgf cm, 94 ft.lbf)
(c) Install the power steering gear assembly with 2 bolts.
Torque: 1 27 N.m (1,300 kgf .cm, 94 ft.lbf)
(d) Install the cont6r msmber with the bolt and 2 nuts.
Torque:80 N.m (820 kgf.cm,59 ft.lbf)
(e) Install the 2 grommats.
(f) Install tho exhaust pipe support bracket with 2 bolts.
Torque: 1 9 N.m (195 kgf .cm, 14 ft.lbf)