Toyota Celica 1993 AT200 series Repair Manual page 613

BRAKE SYSTEM - ANTI-LOCK BRAKE SYSTEM
Check that there is no continuity botween each termi-
nal and sensor body.
Connect tho sp6sd sensor connector.
2. INSPECT SENSOR INSTALLATION
Check that the sensor installation bolt is tight€ned
properly. lf not, tighton the bolt.
T o r q u e : 8 . 0 N . m ( 8 2 k g f ' c m , 7 1 I n . . l b f )
3. VISUALLY INSPECT SENSOR ROTOR SERRATIONS
(a) Remove the axle hub.
(See page SA - 1 33)
(b) Inspect tho sonsor rotor serrations for scratches,
cracks, warping or missing teeth.
(c) Install th€ axle hub.
(See page SA - 1 33)
NOTICE: To prevent damage to the rorrationr, do not
.t?iko th. axlc hub.
4, PERFORM SPEED SENSOR SIGNAL CHECK
(See page BR - 82)
(d)
(e)